Working principle and characteristics of axial flow pump
1. Working principle of axial flow pump
The working principle of axial flow pump is different from that of centrifugal pump. It mainly uses the thrust generated by the high-speed rotation of impeller to lift water. The lifting force generated by the rotating blades of the axial flow pump on the water can push the water from below to above.
The blades of the axial flow pump are generally immersed in the pool of the suction water source. Due to the high-speed rotation of the impeller, under the action of the lift generated by the blade, the water is continuously pushed upward to make the water flow out along the outlet pipe. With the continuous rotation of the impeller, the water is continuously pressed to a high place.
2. General characteristics of axial flow pump
(1) The flow direction of water in the axial flow pump is along the axial suction and axial outflow of the impeller, so it is called axial flow pump.
(2) With low lift (1 ~ 13 meters), large flow and high benefit, it is suitable for drainage and irrigation in plain, lake and river areas.
(3) There is no need to fill water before starting, and the operation is simple.
